FOLR3 IQ-ELISA 试剂盒

• FOLR3 Microplate (Item A): 96 well PCR plate coated with anti-Human FOLR3
• Wash Buffer I Concentrate (20x) (Item B): 25 ml of 20x concentrated solution
• Standards (Item C): 2 vials of recombinant Human FOLR3
• Assay Diluent A (Item D): 30 ml diluent buffer, 0.09% sodium azide as preservative. For Standard/Sample (serum/plasma) diluent
• Assay Diluent B (Item E): 15 ml of 5x concentrated buffer. For Standard/Sample (cell culture medium/urine) diluent
• Detection Affinity Reagent for FOLR3 (Item F): 2 vials of a 4x concentrated solution of anti-Human FOLR3 affinity reagent
• IQELISA Detection Reagent (Item G): 1.4ml of a 10x concentrated stock
• Primer Solution (Item I): 1.7 ml vial
• PCR Master Mix (Item J): 1.2 ml vial
• PCR Preparation buffer (Item K): 1ml vial of 10x concentrated buffer
• Final Wash Buffer (Item L): 10ml vial of 10x concentrated buffer

• Real-time PCR instrument, Bio-Rad recommended
• Precision pipettes to deliver 2 μL to 1 mL volumes
• Adjustable 1-25 mL pipettes for reagent preparation
• 100 mL and 1 liter graduated cylinders
• Absorbent paper
• Distilled or deionized water
• Log-log graph paper or computer and software for data analysis
• Tubes to prepare standard or sample dilutions
• Heating block or water bath capable of 80^°C

The Immuno-Quantitative ELISA (IQELISA™) kits are an innovative assay platform that combines the specificity and ease of use of an ELISA with the sensitivity of real-time PCR. Also called immuno-PCR, this detection platform results in an assay that is simultaneously familiar and cutting edge. Compared to traditional ELISA, IQELISA™ enables the use of only 1/10th the sample volume while also providing 10x more sensitivity.

1. Prepare all reagents, samples and standards as instructed
2. Add 25 μL standard or sample to each well. Incubate for 2.5 hours at room temperature or overnight at 4^°C
3. Add 25 μL detection affinity reagent to each well. Incubate 1 hour at room temperature
4. Add 25μL of IQELISA Detection Reagent to each well. Incubate 1 hour
5. Add 15μL Primer solution 10μL of PCR master mix to each well
6. Run real-time PCR