Working concentrations for specific applications should be determined by the investigator. The appropriate concentrations may be affected by secondary antibody affinity, antigen concentration, the sensitivity of the method of detection, temperature, the length of the incubations, and other factors. The suitability of this antibody for applications other than those listed below has not been determined. The following concentration ranges are recommended starting points for this product.
ELISA: 0.05-0.2 µg/mL Western blot: 0.1-1.0 µg/mLWestern blot using ONE-HOUR WesternTM Kit: For quick results, ONE-HOUR WesternTM Kit is recommendet. 10 µg of this antibody is mixed with 10 mL of WB solution for 8 cm X 8 cm membrane.Other applications: User-optimized
限制
仅限研究用
状态
Liquid
缓冲液
PBS, pH 7.4, containing 0.02 % sodium azide.
储存液
Sodium azide
注意事项
WARNING: Reagents contain sodium azide. Sodium azide is very toxic if ingested or inhaled. Avoid contact with skin, eyes, or clothing. Wear eye or face protection when handling. If skin or eye contact occurs, wash with copious amounts of water. If ingested or inhaled, contact a physician immediately. Sodium azide yields toxic hydrazoic acid under acidic conditions. Dilute azide-containing compounds in running water before discarding to avoid accumulation of potentially explosive deposits in lead or copper plumbing.
储存条件
4 °C/-20 °C
储存方法
The antibody is stable for 2-3 weeks if stored at 2-8°C. For long term storage, aliquot and store at -20°C or below. Avoid repeated freezing and thawing cycles.